Home Paintguns Mechanical "Shark" Custom Milled Autococker - TnC Products c. 1999

“Shark” Custom Milled Autococker – TnC Products c. 1999

From the collection of Chris Ogaz at Ogaz Enterprises, this early Shark custom TnC Products Autococker was machined from a stock WGP right feed.

While this Autococker looks plain compared to many of the other bodies that Ogaz machined over time, it’s neat to see some of his early custom jobs. Looking at this body we can notice the slight differences and similarities.

This Shark Autococker was machined from a stock WGP body, before Chris Ogaz was machining bodies from billet aluminum. This body dates to about 1998 to 2000. This was purchased as a complete marker from Ogaz and his back block, bolt, vertical asa, front block, and Volumizer are all installed on this marker.

In around 1998/1999 Chris and Tino Ogaz were approached by Richard at Spanky Paintball and asked Ogaz Enterprises could machined some fancy Autocockers. Chris began by cutting stock right feed bodies and turned some of these into the Fishbone, Ying Yang, Grave Yard and the Cobra series for Spanky.
Another right feed Autococker that Ogaz machined was the Viper Autococker. This was a body kit that was sold to other retailers (and to Spanky as the Ninja Autococker).

Find an archived page from Spanky’s site in 1999 showing their various models of Autocockers here.

More history on Spanky Paintball
Videos on Chris Ogaz’s Autocockers
History on TnC Products
And Autococker parts for sale

Take a second to support Paintball History on Patreon!

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Replacing a stock Nelspot 007 Piercing Pin with a CCI Assembly

Ed "Smiley" Beale's modification for replacing the stock Piercing pin on a Nelson nelspot 007.

Sovereign to Autococker barrel thread adapter

A neat custom adapter that allows a Sovereign semi auto to take the barrel from an Autococker. Shown on a customized Bad Boyz Toyz Sovereign.

FBM Gothic Cocker Body with Tubes

This video offers a closer look at a FBM Gothic Autococker body machined by Chris Ogaz at TnC Products and Ogaz Enterprises.

PMI 3 with serial in the 500s

A look at a PMI 3 paintball gun that has the matching feed block, side plates and trigger guard. This paintgun is likely from 1990.

Automag RT Pro with Blue X valve

A sweet Automag getting parted out with a blue X valve. The X valve comes equipped with a Ultra Light Trigger and of course the Lvl 10 anti chop.
Take a second to support Paintball History on Patreon!