Home Equipment Parts A Quick Look at a CCM Delrin Trigger from an 86 Slider...

A Quick Look at a CCM Delrin Trigger from an 86 Slider Frame

In this quick video I show the ccm delrin trigger for the CCM 86 slider frame. This video is super short but illustrates the thickness of this trigger plate. This plate is considerably thicker than a standard WGP nickel plated steel plate (or stainless). I do not see wear on this delrin trigger so it might be new?

Another shot of the Series 5 with the CCM 86 slide trigger frame.
A CCM Series 5 with the CCM 86 slide trigger frame.

This was an extra delrin trigger plate that came with a CCM slider frame I bought a few months back. The frame is pictured above with a CP rail and asa on it.
Find more CCM articles at https://paintballhistory.com/tag/ccm

And find CCM online at https://store.chipleymachine.com/

Take a second to support Paintball History on Patreon!

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Replacing a stock Nelspot 007 Piercing Pin with a CCI Assembly

Ed "Smiley" Beale's modification for replacing the stock Piercing pin on a Nelson nelspot 007.

Sovereign to Autococker barrel thread adapter

A neat custom adapter that allows a Sovereign semi auto to take the barrel from an Autococker. Shown on a customized Bad Boyz Toyz Sovereign.

FBM Gothic Cocker Body with Tubes

This video offers a closer look at a FBM Gothic Autococker body machined by Chris Ogaz at TnC Products and Ogaz Enterprises.

PMI 3 with serial in the 500s

A look at a PMI 3 paintball gun that has the matching feed block, side plates and trigger guard. This paintgun is likely from 1990.

Automag RT Pro with Blue X valve

A sweet Automag getting parted out with a blue X valve. The X valve comes equipped with a Ultra Light Trigger and of course the Lvl 10 anti chop.
Take a second to support Paintball History on Patreon!