Home Tech Technical information Stock Autococker and Automag frame hex nut

Stock Autococker and Automag frame hex nut

In this video I demonstrate how to replace the hex nut in a stock Autococker or Automag carbon fiber frame and what parts BacciPaintball offers as replacements for lost hex nuts.

Hex nuts are available here:
http://www.baccipaintball.com/aut1492.html
http://www.baccipaintball.com/aut1493.html

Autococker frames are here:
http://www.baccipaintball.com/parts/semi/autococker-parts/autococker-grip-frames-1.html

And Automag frames are here:
http://www.baccipaintball.com/parts/semi/airgun-designs-automag-parts/automag-grip-frames.html

Find more product videos here:
http://www.youtube.com/playlist?list=PLJC7papTosfU0nPMPDG9ueQ2f3_h973nF

 

Take a second to support Paintball History on Patreon!

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Replacing a stock Nelspot 007 Piercing Pin with a CCI Assembly

Ed "Smiley" Beale's modification for replacing the stock Piercing pin on a Nelson nelspot 007.

Sovereign to Autococker barrel thread adapter

A neat custom adapter that allows a Sovereign semi auto to take the barrel from an Autococker. Shown on a customized Bad Boyz Toyz Sovereign.

FBM Gothic Cocker Body with Tubes

This video offers a closer look at a FBM Gothic Autococker body machined by Chris Ogaz at TnC Products and Ogaz Enterprises.

PMI 3 with serial in the 500s

A look at a PMI 3 paintball gun that has the matching feed block, side plates and trigger guard. This paintgun is likely from 1990.

Automag RT Pro with Blue X valve

A sweet Automag getting parted out with a blue X valve. The X valve comes equipped with a Ultra Light Trigger and of course the Lvl 10 anti chop.
Take a second to support Paintball History on Patreon!